Dvico PVR M-4130SH User Manual download pdf (Page 3)

Usage Precautions

Please read the following usage precautions before using your TViX.

Connect the A/V cable

Make sure the power is off when you connect the A/V cable between the TViX and the TV.

Cleaning the TViX

When cleaning the TViX product, pull out the power cord and then wipe it with a soft piece of dry cloth.

TV out, ZOOM, and default volume depend on the TViX’s setting.

Checking Digital signal Reception

• Press the INFO button on the remote control. The Signal strength meter will appear on the left-bottom.

• If signal strength meter indicates less than 14.9db, adjust your antenna to increase the signal strength.

Continue to adjust the antenna until you find the best position with the strongest signal.

Record Notice

• The first partition of the internal hard disk must use the NTFS format. FAT32 format can cause an error

message.

• When the signal is weak or unstable, recording cannot work properly.

• When the hard disk is unstable, recording cannot work properly. So you must run Check Disk

sometimes.

• Hard disk requires the Check Disk, you must run the Check Disk sometimes

DTV EPG

• HDTV EPG(Electronic Program Guide) shows the stream guide of real time.

• You can use the scheduled recording and scheduled watch using this EPG window.

• To use this EPG guide, you must view the digital channels in advance.

Analog channel

TViX PVR does not support analog (PAL) broadcasting and cable.

To use the analog channel, use a RF splitter. (We don’t support RF splitter in the package.)

Connect USB cable

When connected to the computer through the USB cable the TViX acts as an external USB storage device

(In this state, there is no video/audio output and the VFD will show as USB ON). For normal TViX play mode,

disconnect the USB cable connected to the computer and turn on the TViX.

Detaching the HDD

When detaching the HDD, please let the heat out sufficiently.

1 2 3 4 5 6 7 8 ... 72 73

No comments

Dvico PVR M-4130SH User Manual Page 3